what about using the dpad simply?

I find that if I press the D-pad then the keyboard actually disappears (it minimizes) so I then have to click on the icon to bring the board back up. Cursor keys would make it much smoother and quicker than the built in D-pad.

Please Tene for next release!

hello,

excellent product!
i just wish it would not open the accents/symbols/umlauts so fast...actually i would prefer it to keep the orginal letter and just open the line with the alternatives. for instance, if i wait until i see the "E" (delay set to 1ms) it is already almost too late to avoid the € sign to appear...

i see 2 alternatives: one: make the delay until symbols open customisable, ( i would go for .5 sec) or, probably even better, and conform to the iphone approach: let the original letter where it is and make select alternative symbols/umlauts/accents by moving over to them.

is there any alternative available? i have to say: i am not a programmer...;-)

cheers,,

Andy.

Bonjour,
Voici le clavier français suisse qwertz
Meilleures salutations
FrancaisQWERTZ.zip

I agree the cursor key are ABSOLUTELY needed, does anybody have the code to use ?

www.vigierguitars.com

Hallo Tene
Thank you for your replay and for your very very good program. But ...
Some new devices from HTC (like Artemis, or Cruise) have disable d-pad (typical all device with roll navigation in mouse mode) and on this device is not any possibility movement of cursor (with your keyboard). I very solicit you, can you add at least left and right cursor keys in to your program? Is it big problem?
Wery thanks



Edited 3 time(s). Last edit at 02/15/2008 10:44AM by ja.prvni.

Hi,

here is the Danish Keyboard-layout, which is based on the German layout including the associations.

Her er det danske tastatur-layout. Det er baseret på det tyske tastatur inkl. dens tast-associationer.
Danish.layout

Best Regards

Claudius Schultz
www.necsus.dk

Claudius Wrote:
-------------------------------------------------------
> Hi,
>
> here is the Danish Keyboard-layout, which is based
> on the German layout including the associations.
>
> Her er det danske tastatur-layout. Det er baseret
> på det tyske tastatur inkl. dens
> tast-associationer.
>


Many Tak Claudius

Thank u very much

Bonjour,
j'ai mis au point un petit fichier excel, scriptPocketCMKeyboard.xls, qui permet de créer facilement les lignes
keyboard_layout_1
keyboard_layout_2
keyboard_layout_3
keyboard_layout_4

Saisir les layout sur la feuille "layout", et, dans la feuille "script" copier les case A1 à A4 dans le bloc-note.

Has anyone created a simulator to test the layouts without having to install it on the phone every time?

Umm, the first post says that the default for symbol pads is 250ms, which suggests that one can change it... but how?

Use for example symbol_pad_timer=150 in layout or settings.ini file to set it to 150ms.

Set Default to PCMKeyboard ?

here is Arabic layout..... an updated one based on the Best.layout file.. file updated with minor fixes
Arabic2.layout



Edited 2 time(s). Last edit at 04/19/2008 07:58AM by PapaDocta.

How to set Default to PCMKeyboard ?
I am Vietnamese.
Here is Vietnam layout.....
VNlayout.zip

mauminh Wrote:
-------------------------------------------------------
> How to set Default to PCMKeyboard ?
> I am Vietnamese.
> Here is Vietnam layout.....
>

In english i think that is:

Start > Setup > Personal > Keyboard > Default = PCMKeyboard

To set Default to PCMKeyboard as you guided for me:
Start > Setup > Personal > Keyboard > Default = PCMKeyboard

After reseting device, it returns the begining default not PCMKeyboard.

May you guide me the others method?

Thanks



Edited 1 time(s). Last edit at 04/18/2008 04:35PM by mauminh.

Use this program called SIPChange. This allows it to stick after a soft reset.
SIPChange.CAB

Layout Keyboard Vietnamese here: (Font UNICODE)

keyboard_layout_1=qwertyuiop\nasdfghjkl"\n\2zxcvbnm\B\B\n\M\M?! .,\N\N
keyboard_layout_2=QWERTYUIOP\nASDFGHJKL"\n\1ZXCVBNM\B\B\n\M\M?! .,\N\N
keyboard_layout_3=ăâêôơ789*%\nưđ:;#456@'\n\4&.-+123\B\B\n\M\M() =0\N\N
keyboard_layout_4=ĂÂÊÔƠ789$€\nƯĐ\\/~456\[\]\n\3<>_+123\B\B\n\M\M{} =0\N\N
symbol_pad=a,áàảãạ
symbol_pad=ă,ắằẳẵặ
symbol_pad=â,ấầẩẫậ
symbol_pad=e,éèẻẽẹ
symbol_pad=ê,ếềểễệ
symbol_pad=i,íìỉĩị
symbol_pad=o,óòỏõọ
symbol_pad=ô,ốồổỗộ
symbol_pad=ơ,ớờởỡợ
symbol_pad=u,úùủũụ
symbol_pad=ư,ứừửữự
symbol_pad=y,ýỳỷỹỵ
symbol_pad=A,ÁÀẢÃẠ
symbol_pad=Ă,ẮẰẲẴẶ
symbol_pad=Â,ẤẦẨẪẬ
symbol_pad=E,ÉÈẺẼẸ
symbol_pad=Ê,ẾỀỂỄỆ
symbol_pad=I,ÍÌỈĨỊ
symbol_pad=O,ÓÒỎÕỌ
symbol_pad=Ô,ỐỒỔỖỘ
symbol_pad=Ơ,ỚỜỞỠỢ
symbol_pad=U,ÚÙỦŨỤ
symbol_pad=Ư,ỨỪỬỮỰ
symbol_pad=Y,ÝỲỶỸỴ
symbol_pad=\M,1234567890

download here :
New_LayoutSkin_VietName.zip

Hi,

When pressing the shift key I want a pop up to show ?#$@&*() symbols. Can anyone tell me how to accomplish that.

Thanks

While studying documentation and discussion on PCM KeyBoard, I still haven't found any explanation or a helpful tip on one particular detail which in fact could be quite useful for further development of this jolly flexible open-source product. What I mean is some easy configuration tool for handling both portrait and landscape layouts within one single skin pack (that would be programmatically switched when PD-screen is toggled).

I believe that many developers would appreciate an opportunity to set two separate layouts for horizontal and vertical screen orientations - at least, for the reason of screen space optimization. For instance, with such a tool one could easily decrease the number of rows (and, subsequently, increase the number of keys in a row) for landscape mode, which would be quite helpful for many languages that have larger alphabets than English.

Even now, an attempt to set a number of keys in a row to 11 instead of 10 (say, to simulate a standard 33-letter Russian keyboard) will cause an inadequate screen representation of the whole thing in landscape mode (left and right keys in rows will not fully fit the screen border). Perhaps, there is some subtle trick to avoid this conflict (the one that I still miss), but, as far as I believe, a strictly declared function always wins over hacking exploits, in a long run

Hope that my suggestion would be of some use for 'tene' or anyone behind the magic mysterious PCM KeyBoard And, of course, thank you for this great job, guys.



Edited 1 time(s). Last edit at 04/28/2008 02:48PM by Sir Isaac.

Please stop spamming...

-oh, sorry-



Edited 3 time(s). Last edit at 04/28/2008 10:59PM by Sir Isaac.

Again please stop spamming :p

Does anybody know how to escape brackets ([]) inside bracket constructions like [1...]? My syntax like

[1\[/b\]]

doesn't seem to work at all..


Edited 1 time(s). Last edit at 05/01/2008 11:04PM by Sir Isaac.

What is the symbol which you would like to obtain on key??

Quote:

klmn
What is the symbol which you would like to obtain on key??

Why, a large variety of popular tags contain brackets, like simple BBCodes mentioned in my example above. The question is - does PCMK 1.4 support escaping nested brackets and backslash? So, what is your guess, sir?



Edited 3 time(s). Last edit at 05/02/2008 11:58AM by Sir Isaac.

Ok, now I see your point Sir_Isaac.

Well, it seems that it is not possible with current version of PCMK to obtain for example [/b] in the way you would like to.

I tried to test various syntaxes and it seems that you can obtain only [/b (without closing "]") as each ] is interpreted as end of [1...]. This ] has to be entered manualy if I am not wrong.

To obtain [/b the correct syntax (at least it works on my device) is [1[/b] - hopefully it will be helpful

Oh, thanks for your study, klmn. It seems that now we've come to same results I'm not sure that I should draw Tene's attention to this matter of escaping nested symbols, but here's one little limitation for PCMK layout-makers. Apart from BBCodes and other common tags, even some basic smilies like :-[ or : )] contain bracket(s) and backslashes, let alone manga ones (/_\) ([o])



Edited 1 time(s). Last edit at 05/03/2008 01:57AM by Sir Isaac.